Closeboard Larch Fence Panel with topper/trellis solid frame 45×45

Larch closeboard panel with trellis topper

This framed closeboard panel combines smooth vertical boards with a decorative upper section. Concealed front pins and rear-facing nails help maintain a clean presentation on the main visible face.

Panel specification

• Available heights: 150, 183 and 210cm
• Board size: approximately 15mm thick x 153mm wide
• Frame: approximately 45 x 45mm
• Material: larch
• Front fixings: concealed
• Top section: topper or trellis

Installation

The framed construction is intended for use with a suitable fencing system, including appropriately sized concrete posts where applicable. Confirm the panel width, post channel and installation clearances before ordering.

Natural larch timber

Larch has an attractive grain and warm natural colour. Variations in colour, grain and knots are normal characteristics of timber. If left untreated, the surface will gradually weather to a silver-grey tone. A suitable exterior oil can be applied and maintained if you wish to retain more of the original colour.

Planning the installation

Check the finished opening, post spacing and required clearances before ordering. The posts, foundations, fixings and installation method must be suitable for the panel dimensions and conditions at the property. Seek advice from a competent installer if you are unsure.

Delivery and lead time

This product is made to order. Standard production is normally completed within 10–14 working days, although lead times can vary during busy periods. Please contact us before ordering if your project is time-sensitive or requires a bespoke size.