Closeboard Garden Gate with Trellis Top 90cm x 1.8m

Closeboard garden gate with trellis top

This pedestrian gate combines traditional overlapping closeboard cladding with a lighter decorative trellis section. It coordinates with closeboard fencing while adding visual interest to a garden entrance.

Gate specification

• Standard size: approximately 90cm wide x 180cm high
• Frame timbers: approximately 45 x 95mm
• Lower section: overlapping vertical closeboard boards
• Upper section: decorative trellis
• Finish: pressure-treated green
• Bespoke sizes and colours: available on request

Planning the proportions

Confirm the required overall height and the proportions of the closeboard and trellis sections before ordering, particularly when matching adjoining fencing.

Pressure-treated timber

The timber is pressure treated for exterior use. Natural movement, small surface checks and variations in grain can occur as outdoor timber responds to changes in moisture and temperature. Periodic inspection and maintenance will help preserve its appearance and performance.

Before ordering

Measure the finished opening carefully and allow for the gate posts, hinges, latch and the clearances required by your chosen fitting method. Confirm the finished gate size rather than relying only on the opening measurement. Contact us if you need help with a bespoke size.

Installation

The supporting posts, hinges, latch, fixings and installation method must be suitable for the gate size, weight and intended use. Seek advice from a competent installer if you are unsure.

Delivery and lead time

This gate is handmade to order. Standard production is normally completed within 10–14 working days, although lead times can vary during busy periods. Please contact us before ordering if your project is time-sensitive or requires bespoke dimensions.