Silver Fir Contemporary Slatted Fence Panel | Modern Garden Fencing 6ft wide/183cm

Silver Fir contemporary slatted fence panel

This handmade pressure-treated softwood panel combines horizontal slats with a light Silver Fir finish. The approximately 7mm spacing provides a balance of screening, light and airflow for garden boundaries, patios and landscaping projects.

Panel specification

• Standard width: 183cm (6ft)
• Available heights: 30, 60, 90, 120, 150, 180 and 210cm
• Gap between battens: approximately 7mm
• Material: pressure-treated softwood
• Construction: single-sided horizontal slats
• Finish: Silver Fir

Treated timber

The timber is treated for exterior use. Natural movement, small surface checks and variations in grain can occur as outdoor timber responds to changes in moisture and temperature. Periodic inspection and maintenance of the coloured finish will help preserve its appearance.

Colour and timber variation

Product photographs and screen settings can only provide a guide to the finished colour. Timber is a natural material, so grain, texture and shade will vary, and individual battens may absorb the finish differently. Contact us before ordering if colour matching is especially important.

Planning the installation

Check the finished opening, post spacing and required clearances before ordering. Posts, foundations, fixings and the installation method must be suitable for the panel dimensions and conditions at the property. Seek advice from a competent installer if you are unsure.

Delivery and lead time

This product is handmade to order. Standard production is normally completed within 10–14 working days, although lead times can vary during busy periods. Please contact us before ordering if your project is time-sensitive or requires a bespoke size.

Stackable Venetian Panels — How Your Order Will Be Supplied

Effective for orders placed on or after 12 October 2026.

To make panels easier to handle and help us offer a more affordable delivery service using one driver, Venetian fence panels above 90cm high will be supplied in stackable sections.

This applies to all our larch, Scandinavian redwood, cedar and coloured Venetian fencing ranges with either 7mm or 20mm gaps.

The sections are installed one above the other to create your ordered panel height. Once correctly installed, the finished appearance is exactly the same as a single full-height panel.

Sections supplied per ordered panel

Each section retains the ordered panel width. For example, a 150cm-high × 1830mm-wide panel will arrive as one 90cm-high section and one 60cm-high section, both 1830mm wide.

Consistent gaps between sections

On every panel, regardless of height, the rear support battens extend below the bottom slat by an amount matching the chosen gap:

• 7mm-gap panels: an extra 7mm.
• 20mm-gap panels: an extra 20mm.

These extensions maintain the correct spacing where the sections meet, creating a consistent slatted appearance throughout your finished fence.

Please see the last image in the product gallery for an illustrated guide to all the height combinations.

If you have any questions about how your panels will be supplied or installed, please contact us before ordering.