Solid Frame Gate with Slats Pressure- Treated

Pressure-treated solid-frame slatted gate

This contemporary pedestrian gate combines a substantial timber frame with horizontal slats and reinforced bracing. It can coordinate with slatted fencing for garden paths, side entrances and boundary projects.

Available options

• Standard width: approximately 90cm
• Available heights: 90, 120, 150, 180 and 210cm
• Gap options: approximately 7mm or 20mm
• Material: pressure-treated timber
• Design: horizontal slats with reinforced frame
• Bespoke sizes and coordinating colours: available on request

Choosing the gap

The 7mm option provides closer screening, while the 20mm option creates a more open appearance with increased light and airflow.

Pressure-treated timber

The timber is pressure treated for exterior use. Natural movement, small surface checks and variations in grain can occur as outdoor timber responds to changes in moisture and temperature. Periodic inspection and maintenance will help preserve its appearance and performance.

Before ordering

Measure the finished opening carefully and allow for the gate posts, hinges, latch and the clearances required by your chosen fitting method. Confirm the finished gate size rather than relying only on the opening measurement. Contact us if you need help with a bespoke size.

Installation

The supporting posts, hinges, latch, fixings and installation method must be suitable for the gate size, weight and intended use. Seek advice from a competent installer if you are unsure.

Delivery and lead time

This gate is handmade to order. Standard production is normally completed within 10–14 working days, although lead times can vary during busy periods. Please contact us before ordering if your project is time-sensitive or requires bespoke dimensions.