Contemporary Slatted Fence Panels – Colour EBONY Black Single Sided 183cm wide (6ft)
From £54.00 inc. VAT
Important: How Your Panels Are Supplied
For orders placed on or after 12 October 2026, Venetian panels above 90cm high are supplied in stackable sections. This applies to all larch, Scandinavian redwood, cedar and coloured Venetian ranges with 7mm or 20mm gaps.
Once correctly installed, the finished appearance is exactly the same as a single full-height panel. Extended rear support battens maintain the matching gap between sections.
Please see the last image in the product gallery for a guide to the section sizes supplied.
Handmade single-sided contemporary slatted fence panel in a deep Ebony Black finish. The panel is 183cm (6ft) wide, with selectable heights from 30 to 210cm and a choice of approximately 7mm or 20mm gaps.
The pressure-treated timber construction provides clean horizontal lines for modern garden boundaries and screening.
Why Choose Us?
- High-Quality Products
- Many Payments Options
- Excellent Customer Service
Ebony Black single-sided slatted fence panel
This contemporary panel combines pressure-treated timber with a rich Ebony Black finish. Its horizontal slats create a strong architectural look for gardens, terraces and landscaped outdoor areas.
Available options
- Standard width: 183cm (6ft)
- Available heights: 30, 60, 90, 120, 150, 180 and 210cm
- Gap options: approximately 7mm or 20mm
- Construction: single-sided horizontal slats
- Finish: Ebony Black
Choosing the gap
The 7mm option provides closer screening, while the 20mm option creates a more open appearance with increased light and airflow. Consider the viewing angle and required level of screening when making your selection.
Treated timber
The timber is treated for exterior use. Natural movement, small surface checks and variations in grain can occur as outdoor timber responds to changes in moisture and temperature. Periodic inspection and maintenance of the coloured finish will help preserve its appearance.
Colour and timber variation
Product photographs and screen settings can only provide a guide to the finished colour. Timber is a natural material, so grain, texture and shade will vary, and individual battens may absorb the finish differently. Contact us before ordering if colour matching is especially important.
Planning the installation
Check the finished opening, post spacing and required clearances before ordering. Posts, foundations, fixings and the installation method must be suitable for the panel dimensions and conditions at the property. Seek advice from a competent installer if you are unsure.
Delivery and lead time
This product is handmade to order. Standard production is normally completed within 10–14 working days, although lead times can vary during busy periods. Please contact us before ordering if your project is time-sensitive or requires a bespoke size.
Stackable Venetian Panels — How Your Order Will Be Supplied
Effective for orders placed on or after 12 October 2026.
To make panels easier to handle and help us offer a more affordable delivery service using one driver, Venetian fence panels above 90cm high will be supplied in stackable sections.
This applies to all our larch, Scandinavian redwood, cedar and coloured Venetian fencing ranges with either 7mm or 20mm gaps.
The sections are installed one above the other to create your ordered panel height. Once correctly installed, the finished appearance is exactly the same as a single full-height panel.
Sections supplied per ordered panel
| Ordered height | Sections supplied |
|---|---|
| 90cm | 1 × 90cm panel |
| 120cm | 1 × 90cm + 1 × 30cm |
| 150cm | 1 × 90cm + 1 × 60cm |
| 180cm | 2 × 90cm |
| 210cm | 1 × 90cm + 2 × 60cm |
Each section retains the ordered panel width. For example, a 150cm-high × 1830mm-wide panel will arrive as one 90cm-high section and one 60cm-high section, both 1830mm wide.
Consistent gaps between sections
On every panel, regardless of height, the rear support battens extend below the bottom slat by an amount matching the chosen gap:
- 7mm-gap panels: an extra 7mm.
- 20mm-gap panels: an extra 20mm.
These extensions maintain the correct spacing where the sections meet, creating a consistent slatted appearance throughout your finished fence.
Please see the last image in the product gallery for an illustrated guide to all the height combinations.
If you have any questions about how your panels will be supplied or installed, please contact us before ordering.
| Gap Between Battens | 7mm, 20mm |
|---|---|
| Height | 30 cm, 60 cm, 90 cm, 120 cm, 150 cm, 180 cm, 210 cm |
Contemporary Slatted Fence Panels – Colour EBONY Black Single Sided 183cm wide (6ft)
Reviews
There are no reviews yet