Contemporary Slat Fence – Pressure Treated Green 183cm wide (6ft)

Pressure-treated green contemporary slatted panel

This handmade Scandinavian redwood panel combines clean horizontal lines with pressure treatment for exterior use. The approximately 7mm spacing balances screening with light and airflow.

Panel specification

• Standard width: 183cm (6ft)
• Available heights: 30, 60, 90, 120, 150, 180 and 210cm
• Batten size: approximately 45 x 20mm
• Gap between battens: approximately 7mm
• Finished thickness: approximately 40–42mm
• Material: pressure-treated Scandinavian redwood
• Construction: single-sided horizontal slats

Natural weathering

The initial green tint is part of the pressure-treatment process and will gradually soften as the timber weathers. Once the timber is suitably dry, a compatible exterior stain, paint or oil can be applied if a different appearance is required.

Treated timber

The timber is treated for exterior use. Natural movement, small surface checks and variations in grain can occur as outdoor timber responds to changes in moisture and temperature. Periodic inspection and maintenance of the coloured finish will help preserve its appearance.

Planning the installation

Check the finished opening, post spacing and required clearances before ordering. Posts, foundations, fixings and the installation method must be suitable for the panel dimensions and conditions at the property. Seek advice from a competent installer if you are unsure.

Delivery and lead time

This product is handmade to order. Standard production is normally completed within 10–14 working days, although lead times can vary during busy periods. Please contact us before ordering if your project is time-sensitive or requires a bespoke size.