Pegwell Larch Garden Gate 90cm

Pegwell larch garden gate

The Pegwell uses vertical square-edge larch battens to create a simple, contemporary entrance with a natural timber finish.

Gate specification

• Standard width: 90cm
• Available heights: 90, 120, 150, 180 and 210cm
• Batten size: approximately 17 x 44mm
• Batten profile: vertical square edge
• Material: larch
• Bespoke sizes: available on request

Natural larch timber

Larch has an attractive grain and warm natural colour. Variations in colour, grain and knots are normal characteristics of timber. If left untreated, the surface will gradually weather to a silver-grey tone. A suitable exterior oil can be applied and maintained if you wish to retain more of the original colour.

Before ordering

Measure the finished opening carefully and allow for the gate posts, hinges, latch and the clearances required by your chosen fitting method. Confirm the finished gate size rather than relying only on the opening measurement. Contact us if you need help with a bespoke size.

Installation

The supporting posts, hinges, latch, fixings and installation method must be suitable for the gate size, weight and intended use. Seek advice from a competent installer if you are unsure.

Delivery and lead time

This gate is handmade to order. Standard production is normally completed within 10–14 working days, although lead times can vary during busy periods. Please contact us before ordering if your project is time-sensitive or requires bespoke dimensions.